Photo by © UAC The development of the electric vertical take-off and landing (eVTOL) UAV industry is actively gaining momentum, attracting the attention of both major airlines and government agencies. […]
Read more
Category: Technologies
TsAGI has conducted new research into the concept of a regional aircraft with an impeller propulsion system
Photo by © TsAGI Press Service The Central Aerohydrodynamic Institute named after Professor N.E. Zhukovsky (TsAGI) continues research into the possibility of using electric impeller propulsion systems for regional aircraft. […]
Read more
MAI to complete the design of an aerotaxi in 2025
Photo by © Moscow Aviation Institute Press Service Moscow Aviation Institute (MAI) is developing an aerotaxi with a hybrid electric propulsion system on hydrogen fuel. This was reported in the […]
Read more
Wing section with impellers of a promising regional aircraft tested in TsAGI wind tunnel
Photo by © TsAGI Press Service The Central Aerohydrodynamic Institute named after Professor N.E. Zhukovsky (TsAGI) continues research in the field of new-generation regional aircraft. Regional aviation is important for […]
Read more
Roselectronics has developed a neural network for optical means of drone detection
Illustration generated by Stable Diffusion neural network Cyclone Scientific Institute of the Roselektronika holding has developed a neural network for optical detection systems for unmanned aerial vehicles (UAVs) in protected […]
Read more
Russian “black boxes” for aeroplanes and helicopters are demonstrated at SPIEF-2024
Photo by © KRET press service Smolensk-based Izmeritel Research and Production Enterprise, part of the Radioelectronic Technologies Concern, is demonstrating its products in the field of on-board recorders of speech […]
Read more
TsAGI is conducting research on long-haul aircraft with oval fuselage layouts
MC-1 layout / Photo by © TsAGI Press Service Study of the efficiency of alternative long-range aircraft layouts is the main task of the research work “Study of the efficiency […]
Read more
Digital twin will speed up certification of the PD-8 engine
Photo by © UEC Engine-building enterprise ODK-Saturn implements a strategy of digital certification, which involves the use of technologies for creating a digital twin and computer modelling to reduce the […]
Read more
TsAGI has created a set of technologies for non-destructive testing of composites
Photo by © TsAGI Press Service Composite elements can be damaged both in production and during operation as part of an aircraft, and water accumulations in honeycomb structures at altitude […]
Read more
Aviastar plant uses 3D printed tooling
Photo by © press service of the Ministry of Economic Development of the Ulyanovsk region In the production of IL-76MD-90A heavy transport aircraft at the Ulyanovsk branch of PJSC “IL” […]
Read more